Required equipment
The following equipment are required for installation of the cable package IRBDP
SW2 CE.
Equipment
Cable package IRBDP SW2 CE
Circuit diagram
Required tools
Equipment
Standard toolkit, DressPack/Spot-
Pack
Other tools and procedures may
be required. See references to
these procedures in the step-by-
step instructions below.
Required consumables
Consumable
Locking liquid
Procedure
Use this procedure to fit the cable package IRBDP SW2 CE.
1
2
Product manual - DressPack/SpotPack IRB 6650S
3HAC055424-001 Revision: C
Action
DANGER
Turn off all:
•
electric power supply
•
hydraulic pressure supply
•
air pressure supply
to the robot, before entering the robot work-
ing area.
CAUTION
The cable package is sensitive to mechanical
damage. They must be handled with care,
especially the connectors, in order to avoid
damaging them.
© Copyright 2004-2018 ABB. All rights reserved.
2.2.7.3 Fitting the cable package IRBDP SW2 CE
Art. no.
Note
For spare part
A number of versions are available.
number see
chapter:
•
Spare parts
on
page359.
3HAC026209-001
DressPack
Article number
Note
3HAC17290-7
The contents are defined in sec-
tion
Pack on page
These procedures include refer-
ences to the tools required.
Article number
Note
3HAB7116-1
Loctite 243
For locking the gripping clamps.
Note
2 Installation
Continued
Toolkits, DressPack/Spot-
355.
Continues on next page
99