ABB DressPack IRB6650S Product Manual page 83

4
5
Product manual - DressPack/SpotPack IRB 6650S
3HAC055424-001 Revision: C
2.2.6.2 Fitting the cable packages IRBDP MH2 LE and IRBDP SW2 LE
Action
Adjust the connection plate in a way that the
center of each attachment screw is placed
27 mm from the lower end of the connection
plate.
Tighten the screws.
Remove the top cover plate in the back of
the robot base.
© Copyright 2004-2018 ABB. All rights reserved.
2 Installation
Note
xx0700000328
Parts:
• A: Connection plate
• B: Measurement 27 mm
• C: Attachment screw M8x12 quality
8.8-A3F (2 pcs)
C
B
xx0500001422
Parts:
• A: Top cover plate
• B: Customer plate
• C: Process plate
Continues on next page
Continued
A
83