ABB DressPack IRB6650S Product Manual page 62

2 Installation
2.2.4.3 Fitting the cable packages IRBDP MH1 LI and MH2 LI
Continued
16
17
Fitting the cable package IRBDP MH1 LI - the second part
Use this procedure to continue with the second part of fitting the lower arm internal
process cable package IRBDP MH1 LI.
1
Continues on next page
62
Action
Fit the protection cover on the balancing cyl-
inder ear.
Note
When fitting the cable package in, make sure
to have one extra turn around air hose to fix-
ate the upper velcro strap.
The illustration also shows the measure
between the upper and lower strap.
Continue with step two of fitting the process
cable package, depending on variant.
Action
Secure the cable package to the upper arm with
the cable bracket.
© Copyright 2004-2018 ABB. All rights reserved.
Note
xx0500001798
Parts:
• A: Protection cover
• B: Existing strap (upper)
• C: Existing strap (lower)
Depending on which cable harness is
used, continue with step two at:
• IRBDP MH1 LI:
package IRBDP MH1 LI - the
second part on page 62
• IRBDP MH2 LI:
package IRBDP MH2 LI - the
second part on page 64
Note
See the figure in:
• Location of the cable package
IRBDP MH1 LI on page 55
Product manual - DressPack/SpotPack IRB 6650S
3HAC055424-001 Revision: C
Fitting the cable
Fitting the cable