ABB DressPack IRB6650S Product Manual page 162

2 Installation
2.2.11.2 Fitting the cable package IRBDP MH3 UI
Continued
2
3
4
5
6
Apply cable grease
It is necessary to apply cable grease on the cable package inside the tube.
1
2
Continues on next page
162
Action
Apply grease on the highlighted area.
Carefully push the cable package back into the
tube and out through the insert until the area
where grease was applied, is visible and able to
reach.
Apply grease on the highlighted area, so that the
cable package inside the tube is covered with
cable grease all the way through.
Carefully push the cable package back in through
the insert and into its mounting position in the
tube.
Note
Make sure the cables and hoses are not twisted
through the upper arm.
Action
Carefully pull the cable package out 10 to 15
centimeters longer than the final assembly positi-
tion.
Apply grease on the highlighted area.
© Copyright 2004-2018 ABB. All rights reserved.
Note
xx1400001389
xx1400001390
Note
xx1400001389
Product manual - DressPack/SpotPack IRB 6650S
3HAC055424-001 Revision: C