ABB DressPack IRB6650S Product Manual page 296

4 Repair
4.2.11 Replacing the cable package IRBDP MH6 UI and IRBDP SW6 UI LeanID
Continued
9
Check of protective sleeve
The protective hose is protected against wear in exposed areas with a protective
sleeve.
1
2
296
Action
DANGER
Make sure all safety requirements are met when
performing the first test run. These are further
described in
Action
In order to be sure that the protective sleeve is in
the correct position, check the position after some
hours running.
If the protective hose is worn somewhere, adjust
the position of the protective sleeve.
© Copyright 2004-2018 ABB. All rights reserved.
Note
Note
xx1400000224
Product manual - DressPack/SpotPack IRB 6650S
3HAC055424-001 Revision: C