ABB DressPack IRB6650S Product Manual page 258

4 Repair
4.2.7 Replacing the cable package IRBDP SW5 CE (SpotPack Basic)
Continued
L
M
Required equipment
Equipment
Cable package IRBDP SW5 CE
Standard toolkit,
DressPack/SpotPack
Other tools and procedures may
be required. See references to
these procedures in the step-by-
step instructions below.
Removal
Use this procedure to remove the cable package IRBDP SW5 CE from the robot
before it is disassembled.
1
2
Continues on next page
258
Customer plate
Clamp holder with plastic clamp
Action
DANGER
Turn off all:
• electric power supply
• hydraulic pressure supply
• air pressure supply
to the robot, before entering the robot
working area.
CAUTION
The cable package is sensitive to mechan-
ical damage. They must be handled with
care, especially the connectors, in order to
avoid damaging them.
© Copyright 2004-2018 ABB. All rights reserved.
Art. no. Note
For spare part
number see
chapter:
• Spare
parts on
page 359.
3HAC17290-7 The contents are defined in section
Toolkits, DressPack/SpotPack on
page 355.
These procedures include references
to the tools required.
Note
Product manual - DressPack/SpotPack IRB 6650S
3HAC055424-001 Revision: C