2 Installation
2.2.5.2 Fitting the cable package IRBDP MH3 UE
Continued
7
8
9
74
Action
Arrange cable and hose in a way that they
form a smooth bend over and close to the
upper arm, between the brackets on either
side.
Push the cables and hose through the pro-
tection hose and fit them in the gripping
clamp on the bracket left.
Fit a gripping clamp at the other end of the
protection hose.
© Copyright 2004-2018 ABB. All rights reserved.
Note
xx0700000386
Parts:
•
A: Bracket, left
•
B: Arranged cables and hose
•
C: Bracket, right
•
D: Upper arm
Shown in the figure above!
Shown in the figure
Product manual - DressPack/SpotPack IRB 6650S
3HAC055424-001 Revision: C
Location on page
70.