ABB DressPack IRB6650S Product Manual page 142

2 Installation
2.2.9.3 Fitting the cable package IRBDP SW6 LE and IRBDP MH6 UI and SW6 UI, LeanID
Continued
3
4
5
6
Continues on next page
142
Action
Make sure that the hose reinforcement funnel is
fitted correctly, in the direction shown in the figure.
Make sure that the screws (M6x12) fits into the
guiding holes of the hose reinforcement funnel
when it is fitted in the ball joint housing.
CAUTION
The hose reinforcement funnel must not be able
to rotate inside the ball joint housing when fitted.
Fasten the cable package in the ball joint housing.
Only valid for IRBDP SW6 UI:
Fasten the cable package with the process turning
disc bracket.
© Copyright 2004-2018 ABB. All rights reserved.
Note
xx1500000906
xx1200000153
Screw, M6x12 8.8-A2F (1+1 pcs)
xx1500000907
Screw, M6x40 8.8-A2F (2 pcs)
xx1500000908
Screw, (9ADA183-31) (4 pcs) and
washers (4 pcs)
Product manual - DressPack/SpotPack IRB 6650S
3HAC055424-001 Revision: C