Paper Jams At The Top Left Cover - Xerox DocuColor 2240 User Manual

Paper Jams at the Top Left Cover

This section describes how to clear paper jams that occur at the
top left cover of the machine.
NOTE:
transferred to the transfer belt (black film belt) on the machine
body inside the top left cover. Do not touch this transfer belt. Doing
so might adversely affect image quality, or damage the transfer
belt, necessitating belt replacement.
1
Gently open the top left cover while lifting up the release lever.
2
If the edge of the jammed paper can be reached at the output tray,
pull the jammed paper in the direction of the feed-out tray.
CAUTION:
jam in this area.
3
Remove the jammed paper.
NOTE:
the machine.
4
If you cannot remove paper jammed inside the fuser unit, lift up
the lever and remove the jammed paper.
NOTE:
lever to its original position.
5
Press the center section of the top left cover to gently close the
cover, and lift up Tray 5 (Bypass).
When removing jammed paper, images are sometimes
The fuser area is very hot. Be careful when clearing a
If paper is torn, check for any torn pieces of paper inside
After you have removed the jammed paper, return the
U G ( T
S E R U I D E R O U B L E S H O O T I N G
)
5 – 3