005-907 Cvt Pre-Registration Sensor Static Jam Rap - Xerox WorkCentre 5222 Service Manual

Tabloid black-and-white multifunction printer
Hide thumbs Also See for WorkCentre 5222:
Table of Contents

Advertisement

005-907 CVT Pre-Registration Sensor Static JAM RAP

Paper remains on the DADF Pre Registration Sensor.
Initial Actions
Refer to BSD 5.4.
Remove the paper.
Procedure
Execute
Component
Control[005-206 DADF Pre Registration Sensor]. Actuate the DADF Pre
Registration Sensor
(PL
15.7) with paper. The display changes.
Y
N
Check the connections of
P/J781
and P/J761.
rectly.
Y
N
Connect
P/J781
and P/J761.
Check the wire between J781 and J761 for an open circuit or a short circuit (BSD 5.4
3/Flag
4). The wire between J781 and J761 is conducting without an open circuit or
a short circuit.
Y
N
Repair the open circuit or short circuit.
Measure the voltage between the DADF PWB P761-10 (+) and GND (-) (BSD 5.4
4). The voltage is approx. +5VDC.
Y
N
Replace the DADF PWB
(PL
15.3).
Measure the voltage between the DADF PWB P761-12 (+) and GND (-) (BSD 5.4
Actuate the DADF Pre Registration Sensor with paper. The voltage changes.
Y
N
Replace the DADF Pre Registration Sensor
Replace the DADF PWB
(PL
15.3).
Replace the DADF PWB
(PL
15.3).
Launch Version
WorkCentre 5225, 5230
P/J781
and
P/J761
are connected cor-
Flag
Flag
Flag
3).
(PL
15.7).
February, 2008
2-81
Status Indicator Raps
005-907

Advertisement

Table of Contents
loading

This manual is also suitable for:

Workcentre 5225Workcentre 5230

Table of Contents