016-723 Punch Position Error RAP
Job Cancel by Punch Position NG. A job was cancelled because the punch position was
impossible.
Procedure
•
Check the Punch settings for the print data to be sent to the printer.
•
Check the client driver settings or PC settings.
Launch Version
WorkCentre 5225, 5230
016-724 Staple Position RAP
The staple selection and hole punch selection is not compatible.
Initial Actions
Ensure the staple position selection and hole punch position selection is compatible (no holes
will be punched on staples or staples located in holes)
Procedure
Refer customer to following User Guide headings:
•
[Image Rotation] - [Rotation Direction Screen]
February, 2008
2-223
Status Indicator Raps
016-723, 016-724