Xerox WorkCentre 5222 Service Manual page 38

002-500 UI Error RAP
UI detection error while in CUI scan job start:
1. IIT is occupied.
2. Fault is occurring.
3. Service is not CUI.
4. The upper limit number of sheet for XSA
Procedure
Retry the same operation after the fault is cleared, or check limitation with XSA. If the problem
continues, call for Service.
Launch Version
WorkCentre 5225, 5230
002-770 Job Template Processing - HD Full RAP
Job aborted due to insufficient HDD capacity during Job Template processing.
Procedure
Ask customer to separate job into smaller parts. Helpful information may be found in User
Guide sections Overwrite Hard Disk or Mailbox.
February, 2008
2-15
Status Indicator Raps
002-500, 002-770