Automatic 2-Sided Printing Problems; Printer Is Making Unusual Noises; Paper Tray Will Not Close; Condensation Has Formed Inside The Printer - Xerox VersaLink C505S User Manual

Automatic 2-Sided Printing Problems

Probable Causes
Unsupported or incorrect paper.
Your printer model is not configured with
automatic 2-sided printing.
Incorrect setting.

Printer is Making Unusual Noises

Probable Causes
There is an obstruction or debris inside the
printer.

Paper Tray Will Not Close

Probable Causes
The paper tray does not fully close.

Condensation has Formed Inside the Printer

Moisture can condense inside a printer where the humidity is above 85% or when a cold
printer is located in a warm room. Condensation can form in a printer after it has been
sitting in a cold room that is heated quickly.
® ®
Xerox VersaLink C505 Multifunction Printer
User Guide
Solutions
Ensure that you are using a supported paper
size and weight for 2-sided printing. Envelopes,
cardstock, and labels cannot be used for
2–sided printing. For details, refer to
Paper Types and Weights for Automatic 2-Sided
Printing.
Ensure that your printer supports automatic 2-
sided printing. For details, refer to
figurations and Options.
In the print driver Printing Options tab, select
2–Sided Print.
Solutions
Power off the printer and remove the obstruc-
tion or debris. If you cannot remove the obstruc-
tion, contact your Xerox representative.
Solutions
• If the tray is extended for legal-size paper,
the tray protrudes when it is inserted into
the printer. For details, refer to
Tray 1 and Trays 2–5 for the Paper
• Some debris or an object is blocking the
tray.
• The tray is blocked by the table or shelf on
which it is located.
• If the paper lift at the back of the tray is not
locked down, replace the tray.
Troubleshooting
Supported
Printer Con-
Configuring
Length.
8-5