Subaru Legacy 2004 Service Manual page 4166

• Each connector number shown in the wiring dia-
gram corresponds to that in the wiring harness. The
location of each connector in the actual vehicle is
determined by reading the first character of the
connector (for example, a "F" for F8, "i" for i16, etc.)
and the type of wiring harness. The first character
of each connector number corresponds to the area
or system of the vehicle.
Symbol Wiring harness and cord
F Front wiring harness
B Bulkhead wiring harness
E Engine wiring harness
T Transmission cord
Door cord LH & RH, Rear gate cord
D
Rear door cord LH & RH, Rear defogger cord
i Instrument panel wiring harness
Rear wiring harness,
Fuel tank cord,
R
Roof cord, Rear gate cord,
Rear defogger ground cord (Sedan model)
AB Airbag wiring harness
F58
F19
F23 F100
F5
F21
F98
FRONT TURN SIGNAL
LIGHT LH (UPPER)
2 BG
1 B
F19
FRONT TURN SIGNAL
LIGHT LH (LOWER)
3 BG
2 B
F22
Basic Diagnostic Procedure
F27
F22
F34
F96
F47
Each connector number
shown in wiring diagram
corresponds to that in
the vehicle.
F3 (GRAY)
(GRAY)
F19
1 2
WI-00115
WI-9
WIRING SYSTEM