True random number generator (RNG)
13.8.2
RNG status register (RNG_SR)
Address offset: 0x004
Reset value: 0x0000 0000
31
30
29
Res.
Res.
Res.
Res.
15
14
13
Res.
Res.
Res.
Res.
Bits 31:7 Reserved, must be kept at reset value.
Bit 6 SEIS: Seed error interrupt status
This bit is set at the same time as SECS. It is cleared by writing it to '0'.
An interrupt is pending if IE = '1' in the RNG_CR register.
Bit 5 CEIS: Clock error interrupt status
This bit is set at the same time as CECS. It is cleared by writing it to '0'.
An interrupt is pending if IE = '1' in the RNG_CR register.
Bits 4:3 Reserved, must be kept at reset value.
Bit 2 SECS: Seed error current status
Bit 1 CECS: Clock error current status
Note: CECS bit is valid only if the CED bit in the RNG_CR register is set to "0".
Bit 0 DRDY: Data Ready
Once the RNG_DR register has been read, this bit returns to '0' until a new random value is
generated.
If IE='1' in the RNG_CR register, an interrupt is generated when DRDY='1'.
266/771
28
27
26
25
Res.
Res.
Res.
12
11
10
9
Res.
Res.
Res.
0: No faulty sequence detected
1: At least one faulty sequence has been detected. See SECS bit description for details.
0: The RNG clock is correct (fRNGCLK > fHCLK/16)
1: The RNG has been detected too slow (fRNGCLK < fHCLK/16)
0: No faulty sequence has currently been detected. If the SEIS bit is set, this means that a
faulty sequence was detected and the situation has been recovered.
1: One of the noise source has provided more than 64 consecutive bits at a constant value
("0" or "1"), or more than 32 consecutive occurrence of two bits patterns ("01" or "10")
0: The RNG clock is correct (fRNGCLK> fHCLK/16). If the CEIS bit is set, this means that a
slow clock was detected and the situation has been recovered.
1: The RNG clock is too slow (fRNGCLK< fHCLK/16).
0: The RNG_DR register is not yet valid, no random data is available.
1: The RNG_DR register contains valid random data.
24
23
22
Res.
Res.
Res.
8
7
6
Res.
Res.
SEIS
CEIS
rc_w0
rc_w0
RM0401 Rev 3
21
20
19
18
Res.
Res.
Res.
Res.
5
4
3
2
Res.
Res.
SECS
r
RM0401
17
16
Res.
Res.
1
0
CECS
DRDY
r
r
Need help?
Do you have a question about the STM32F410 and is the answer not in the manual?