Radius Settings Cli Commands - Dell PowerConnect 5316M User Manual

4
Click Apply Changes.
The RADIUS Server settings are modified, and the switch module is updated.
Deleting a RADIUS Server for the RADIUS Servers List:
1
Open the RADIUS Settings page.
2
Click Show All.
The RADIUS Servers List page opens.
3
Select a RADIUS Server in the RADIUS Servers List.
4
Select the Remove check box.
5
Click Apply Changes.
The RADIUS server is removed from the RADIUS Servers List.
Defining RADIUS Servers Using CLI Commands
The following table summarizes the equivalent CLI commands for setting fields displayed in the
RADIUS Settings page.
Table 6-38. RADIUS Settings CLI Commands
CLI Command
radius-server timeout timeout Sets the default interval for which a switch
radius-server retransmit
retries
radius-server deadtime
deadtime
radius-server key [key-string] Sets the default authentication and encryption
radius-server host {ip-address
| hostname} [auth-port auth-
port-number] [timeout
timeout] [retransmit retries]
[deadtime deadtime] [key
key-string] [source source]
[priority priority] [usage
type]
show radius-servers
Description
module waits for a server host to reply.
Specifies the default number of times the
software searches the list of RADIUS server hosts.
Configures unavailable default servers to be
skipped.
key for all RADIUS communications between the
switch module and the RADIUS environment.
Specifies a RADIUS server host and any non-
default settings.
Displays the RADIUS server settings.
Configuring System Information
149