Table of Contents
Advertisement
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax
RADIUS Commands
radius-server host
Use the radius-server host Global Configuration mode command to specify a
RADIUS server host. Use the no form of the command to delete the specified
RADIUS server host.
Syntax
radius-server host
[auth-port auth-port-number] [timeout timeout] [retransmit retries]
[deadtime deadtime] [key key-string] [source {ipv4-address | ipv6-address}]
[priority priority] [usage {login | 802.1x | all}
no radius-server host {
Parameters
•
ipv4-address—Specifies the RADIUS server host IPv4 address.
•
ipv6-address—Specifies the RADIUS server host IPv6 address.
•
ipv6z-address—Specifies the RADIUS server host IPv6Z address. The
IPv6Z address format is: {ipv6-link-local-address}%{interface-name}.
The subparameters are:
• ipv6-link-local-address—Specifies the IPv6 Link Local address.
i
nterface-name—Specifies the outgoing interface name. The interface
•
name has the format:
vlan{integer} | ch{integer} | isatap{integer} | {physical-port-
name}.
• The subparameter integer has the format: {decimal-digit} |
{integer}{decimal-digit}. decimal-digit has the range 0–9.
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 5 / 1 5 / 1 2 - F O R P R O O F O N LY
CLI\files\Radius.fm
{ipv4-address | ipv6-address | ipv6z-address | hostname}
ipv4-address
]
ipv6-address
|
|
RADIUS Commands
15
hostname
}
249
Advertisement
Table of Contents
