Radius Settings Cli Commands - Dell PowerConnect 5324 User Manual

Defining RADIUS Servers Using CLI Commands
The following table summarizes the equivalent CLI commands for setting fields displayed in the
RADIUS Settings page.
Table 6-42. RADIUS Settings CLI Commands
CLI Command
radius-server timeout timeout Sets the default interval for which a device waits
radius-server retransmit
retries
radius-server deadtime
deadtime
radius-server key [key-string] Sets the default authentication and encryption
radius-server host {ip-address
| hostname} [auth-port
auth-port-number] [timeout
timeout] [retransmit retries]
[deadtime deadtime] [key
key-string] [source source]
[priority priority] [usage
type]
show radius-servers
The following is an example of the CLI commands:
Console (config)# radius-server timeout 5
Console (config)# radius-server retransmit 5
Console (config)# radius-server deadtime 10
Console (config)# radius-server key dell-server
Console (config)# radius-server host 196.210.100.1 auth-port
1645 timeout 20
Description
for a server host to reply.
Specifies the default number of times the
software searches the list of RADIUS server hosts.
Configures unavailable default servers to be
skipped.
key for all RADIUS communications between the
device and the RADIUS environment.
Specifies a RADIUS server host and any non-
default settings.
Displays the RADIUS server settings.
Configuring System Information
175