Reset Counters Per Port; Rpr: Reset Counters Per Port - 3Com CoreBuilder 9000 User Manual

Reset Counters Per
Port
Reset the statistics counter for total cells through a port. For more
information, see "Display Total Calls in Switch" on page 209.
Command Actions
Enter the menu sequence: (4) STS: Statistics
Enter a parameter at the prompt
Parameter
Port ID
Direct access sequence:
Command Result
System action taken:
System message display:
Example
Enter:
4 2 4 1.1.1
The following message is displayed:
Reset ATM counters completed successfully.
ATM Counters for the specified port are reset to 0.
(2) ATM: ATM layer

(4) RPR: Reset counters per port

Format or Range
<slot.group.port> or 0.0 for all ports
4 2 4 [parameters]
The statistics counter for cells through a port is reset.
Reset ATM counters completed
successfully.
ATM-Layer Statistics 213