Table of Contents
Advertisement
Rev 3.0B Feb.08
FM=n
Friends Mode ‐ Only allow specified IPs to access the Raven
modem.
•
n=0 : Disable Friends mode
•
n=1 : Enable Friends mode ‐ Only packets from friends will
be accepted, packets from other IP addresses are ignored.
Fn=[d.d.d.d]
Friends mode IP address.
•
n=0‐9 Friends list index
•
d.d.d.d = IP address
Using 255 in the IP address will allow any number.
Example: 166.129.2.255 allows access by all IPs in the range
166.129.2.0‐166.129.2.255.
Tip: ATF? will return a list of all the current Fn settings.
Logging
This group includes commands specific to the internal log.
Caution: Logging is intended for diagnostic purposes only. Extensive
use of logging features can cause degraded modem performance.
Figure 1-14: AceManager : Logging
*DBGCOMMLVL=n
Set the logging level for the host or module COM port.
•
n=0 : No logging
•
n=1 : Host COM Port
•
n=2 : Module COM Port
Configuration Commands
119
Advertisement
Table of Contents
