TIP:
Make note of this information for use in later steps.
Click Submit.
5. QuickStart
This section describes configuring the RV50 in serial server mode.
NOTE:
A public static IP account must be used when the module is set up in serial server mode. Priv-
ate dynamic IP accounts do not support the serial server mode.
5.1 Configure RV50
1. Download the collection of RV50 configuration templates from
bellsci.com/downloads
2. Connect the Cellular antenna.
and run the executable downloaded.
RV50 Sierra Wireless AirLink® 4G LTE Cellular Modem
www.camp-
7