Memory Management Commands; Introduction; Command Summary; Command Reference - Sierra Wireless UMTS Command Reference Manual

6: Memory Management
Commands
•

Introduction

•

Command summary

•

Command reference

Table 6-1: Memory management command passwords
Command
!NVBACKUP
Table 6-2: Memory management command details
Command
!NVBACKUP
=<category>
Supporting modems:
•
All
Rev 2.4 Jan.08
Introduction
The modem has 2 MB of non‐volatile memory that is used to
store:
• Factory calibration data
• Settings made in a host application such as Watcher
The commands in this chapter allow you to back up and
restore the data in non‐volatile memory.
Command summary
The table below lists the commands described in this chapter:
Backs up items stored in non-volatile memory
Command reference
Backs up items stored in non-volatile memory
This command creates a backup that is stored in the modem's flash memory.
Parameters:
<category> (specify items to back up):
•
0 = Factory items (includes calibration data)
•
1 = OEM items (includes the PRI file)
•
2 = User items (includes settings made in Watcher or another host appli-
cation)
The command returns:
•
NV Items saved
•
NV Items skipped
The items skipped represent memory to which nothing has been written.
Description
Description
6
Page
59
59