Trap Destination; Community String; Snmp Mib Definition Sample - Sierra Wireless RAVEN IDEN 20070914 User Manual

Rev 3.0B Feb.08
SNMP : Simple Network Management Protocol

Trap Destination

*SNMPTRAPDEST needs to be set with the destination IP and
port. If either are set to zero or empty, SNMP traps are
disabled.
Note: Traps are sent out according to the SNMP security level (i.e. if
the security level is 2, traps will be authenticated and encrypted).
Currently, the only trap supported is LinkUp.

Community String

The community string can be configured using *SNMPCOM‐
MUNITY. The default is "public".

SNMP MIB Definition Sample

AIRLINK-MIB DEFINITIONS ::= BEGIN
IMPORTS
ObjectName FROM SNMPv2-SMI
MODULE-COMPLIANCE FROM SNMPv2-CONF;
org OBJECT IDENTIFIER ::= { iso 3 }
dod OBJECT IDENTIFIER ::= { org 6 }
internet OBJECT IDENTIFIER ::= { dod 1 }
private OBJECT IDENTIFIER ::= { internet 4 }
enterprises OBJECT IDENTIFIER ::= { private 1 }
airlink OBJECT IDENTIFIER ::= { enterprises 20542 }
general OBJECT IDENTIFIER ::= { airlink 1 }
common OBJECT IDENTIFIER ::= { airlink 2 }
status OBJECT IDENTIFIER ::= { airlink 3 }
gps OBJECT IDENTIFIER ::= { airlink 4 }
-- GENERAL --
phoneNumber OBJECT-TYPE
SYNTAX DisplayString (SIZE (10))
MAX-ACCESS read-only
STATUS current
::= { general 1 }
deviceID OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
::= { general 2 }
81