Configuration Examples; Example For Configuring A Local Ccc Connection - Huawei Quidway S9300 Configuration Manual

4 VLL Configuration
Procedure
l
l
----End

4.11 Configuration Examples

This section provides several examples of VLL configuration.

4.11.1 Example for Configuring a Local CCC Connection

4.11.2 Example for Configuring a Remote CCC Connection
4.11.3 Example for Configuring an SVC VLL
4.11.4 Example for Configuring a Martini VLL
4.11.5 Example for Configuring a Local Kompella VLL
4.11.6 Example for Configuring a Remote Kompella Connection
4.11.7 Example for Configuring the Inter-AS Martini VLL Option A
4.11.8 Example for Configuring the Inter-AS Kompella VLL Option A
4.11.9 Example for Configuring Martini VLL FRR (Asymmetrically Connected CEs)
4.11.10 Example for Configuring Kompella VLL FRR (Asymmetrically Connected CEs)
4.11.1 Example for Configuring a Local CCC Connection
Networking Requirements
As shown in
A local CCC connection is created between CE1 and CE2.
4-36
Run the debugging mpls l2vpn { all | advertisement | download | error | event | oam-
mapping | reroute | timer | connections [ interface interface-type interface-number ] }
command in the user view to enable the debugging of the VLL.
Run the debugging bgp update l2vpn [ acl acl-number | ip-prefix ip-prefix-name | peer
peer-ipv4-address ] [ receive | send ] [ verbose ] command in the user view to enable the
debugging of BGP Update messages of the Kompella VLL.
Figure 4-4, the CE is connected to the PE through a GE interface.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Quidway S9300 Terabit Routing Switch
Configuration Guide - VPN
Issue 03 (2009-08-20)