Table of Contents
Advertisement
Site Preparation
Power Module Test Rack and Safety Enclosure Location
The Rack and Safety Enclosure is a free-standing rack with test instruments
installed. It is the customer's responsibility to consider the anticipated location
and requirements to ensure safety and optimize access to instrumentation.
The following figure shows Rack and Safety Enclosure dimensions (doors closed).
You should allow a minimum one meter of space in front of the rack for operator
access, one meter behind the system for service and one meter on each side of
the rack for opening rack doors and sufficient air flow for cooling and ventilation.
1.27 M (50")
Includes hinges and side shelf
folded against rack
18
Power Module Test Rack and Safety Enclosure Location
Shelf:
55 cm (21 5/8")Wide
51.5 cm (20 1/4") Deep
77.5 cm (30.5") from floor
1.1 M (42")
includes front and rear door handles
Keysight PD1550A Installation Guide
Advertisement
Chapters
Table of Contents
