(Config: Intfc1 Hssi) Tx Clock; (Config: Intfc1 Hssi) Tx Enable; (Config: Intfc1 Hssi) Rx; (Config: Intfc1 Hssi) Rx Data - Comtech EF Data CDM-710 Installation And Operation Manual

CDM-710 Broadcast Satellite Modem
Front Panel Operation
(CONFIG: Intfc1 HSSI) Tx
Intfc1
Normal
To control clock inversion (added for compatibility with certain older equipment), select
Normal or Inverted using the
(CONFIG: Intfc1 HSSI) Tx
Intfc1
Enable
Using the
Disable to de-activate the Tx side and set the Data Rate to 0. Press

(CONFIG: Intfc1 HSSI) Rx

Intfc1
Data Buffer Clock Enable
Select Data, Buffer, Clock, or Enable using the
(CONFIG: Intfc1 HSSI) Rx
Intfc1
Datarate
Select Datarate or Invert using the
(CONFIG: Intfc1 HSSI) Rx
Intfc1
Rx: 032.000000 Mbps
This screen is 'status-only' and indicates the Data Rate of the received MPEG-2 transport
stream. Press
(CONFIG: Intfc1 HSSI) Rx
Intfc1
Normal Inverted
To control data inversion (added for compatibility with certain older equipment), select
Normal or Inverted using the
Tx Clock:
Inverted
Tx Enable:
Disable
arrow keys, select Enable to activate the Tx side of this interface, or select
Rx:
Rx Data:
Invert
Data Rate:
or
ENTER CLEAR
Rx Data Invert:
Clock
( E)
arrow keys, then press
Enable
( E)
arrow keys, then press
Data
( E)
arrow keys, then press
Data Datarate
to return to the previous menu.
Data Invert
( E)
arrow keys, then press
5–27
MN/CDM710.IOM
.
ENTER
when done.
ENTER
.
ENTER
.
ENTER
.
ENTER
Revision 11