CDM-625 Advanced Satellite Modem
Front Panel Operation
5.4.13 CONFIG: IP
IP Config:
Use the
5.4.13.1
CONFIG: IP
IP Addresses:
Use the
◄ ►
arrow keys to select the parameter to configure – MAC, Gateway, or Addr/Range
– then press ENTER.
CONFIG: IP
Ethernet MAC Address:
00-06-B0-00-01-06
This read-only menu shows the unit MAC address. Exit this menu by pressing ENTER or CLEAR.
CONFIG: IP
Ethernet IP Gateway:
192.168.001.002
Edit the IP Gateway Address for the Ethernet M&C port for this unit. Use the
select the character to edit, then the
when done.
CONFIG: IP
Ethernet IP Address/Range:
192.168.001.002/24
This display permits the IP Address for the Ethernet M&C port for this unit to be configured. Use
◄ ►
the
arrow keys to select the character to edit, then the
the digit. Press ENTER when done.
Addresses
SNMP
◄ ►
arrow keys to select the parameter to configure.
Addresses
Addr/Range
Addresses
Addresses
▲ ▼
Addresses
Switch-set-up (34)
MAC
Gateway
MAC
(read-only)
Gateway
arrow keys to edit the value of the digit. Press ENTER
Address/Range
▲ ▼
5–42
MN-0000036 (Ref MN/CDM625.IOM)
(34)
(34v)
◄ ►
arrow keys to
(34v)
arrow keys to edit the value of
Revision 1
Need help?
Do you have a question about the CDM-625 and is the answer not in the manual?
Questions and answers