Connection Of F943 Handy Got (For Plc) And Personal Computer; Outline; Configuration To Transfer Screen Data Using Plc Connector - Mitsubishi Electric F920GOT-K Hardware Manual

GOT-F900 SERIES (CONNECTION)
6.3

Connection of F943 Handy GOT (for PLC) and Personal Computer

This section explains how to transfer the screen data from the F943 handy GOT without opening the
rear cover.
6.3.1

Outline

When PLC is connected
RS-232C
When the personal computer is connected to the cable (with an RS-232C connector for PLC) connecting
the PLC using a cable shown below, screen data can be transferred between the F943 Handy GOT and
the personal computer.
OS version compatible with the F943 Handy GOT
The F943 Handy GOT is compatible with Ver. 6.00 or later.
If the OS version is former than Ver. 6.00, remove the rear cover of the F943 Handy GOT, then connect
the personal computer to the connector for PC. (Refer to 6.2.)
6.3.2

Configuration to transfer screen data using PLC connector

GOT-F900
Handy GOT
(RS-232C)
1) Data transfer cable
Cable for Handy GOT
(A)F9GT-HCAB-""M
(C)F9GT-HCAB1-""M
- As to the (C)F9GT-HCAB1-""M, the user should attach an intermediate connector, and prepare a
cable for PLC and a cable for personal computer.
PLC
a) RS-232C cable
(A)
(C)
Total extension distance: 6m (19' 8") or less
Personal computer
PC/AT compatible machine (DOS/V)
Connection of Peripheral Equipment 6
When screen data is transferred
Personal computer
RS-232C
(B)
To power supply
and operation
switches
To RS-232C,
power supply
and operation
switches
Port shape
9-pin D-Sub, female
Power supply unit
＋24V
−24V
FG
Personal computer
a) RS-232C cable
Prepared by user
6-7
1
2
3
4
5
6
7
8
9
10