Jtekt Plc (Jtekt Toyopuc-Plc) - Mitsubishi Electric GOT2000 Series Connection Manual

8.6.1

JTEKT PLC (JTEKT TOYOPUC-PLC)

Device name
*1
Input (X)
*1
Output (Y)
Link relay (L)
Internal relay (M)
Keep relay (K)
Edge detection (P)
*1
Timer (T)
*1
Counter (C)
Special relay (V)
Extended input (EX)
Extended output (EY)
Bit device
Extended internal relay (EM)
Extended keep-relay (EK)
Extended special relay (EV)
Extended timer (ET)
Extended counter (EC)
Extended link relay (EL)
Extended edge detection (EP)
Extended input 2 (GX)
Extended output 2 (GY)
Extended internal relay (GM)
The bit specification of the word device (except
extended buffer register, setup value register)
Data register (D)
Link register (R)
Current value register (N)
Special register (S)
File register (B)
Extended present value register (EN)
Extended setup value register (H)
Word device
Extended special register (ES)
Extended data register (U)
Extended buffer register (EB)
Setup value register (TCS)
The word specification of the bit device
*1 Overlapped device designation of an input (X, EX, GX) and an output (Y, EY, GY), or a timer (T, ET) and a counter (C, EC) is not
allowed.(Example: X0000 and Y0000, EX0000 and EY0000)
*2 To store a setting value of T (timer) or C (counter), use TCS.
Setting value of a timer and a counter is stored in TCS.
(TCS cannot be used if a timer or a counter is not in a program.)
*3 GX, GY, GM and EB can be used only in the PC3JG separate mode.
Access to GX, GY, GM and EB through a link module is not possible.
*1
*1
*1
*1
*1*3
*1*3
*3
*3
*2
Setting range
X000 to X7FF
Y000 to Y7FF
L000 to L7FF
M000 to M7FF
K000 to K2FF
P000 to P1FF
T000 to T1FF
C000 to C1FF
V000 to V0FF
EX000 to EX7FF
EY000 to EY7FF
EM0000 to EM1FFF
EK000 to EKFFF
EV000 to EVFFF
ET000 to ET7FF
EC000 to EC7FF
EL0000 to EL1FFF
EP000 to EPFFF
GX0000 to GXFFFF
GY0000 to GYFFFF
GM0000 to GMFFFF
Setting range of each word device
D0000 to D2FFF
R0000 to R07FF
N0000 to N01FF
S0000 to S03FF
B0000 to B1FFF
EN0000 to EN07FF
H0000 to H07FF
ES0000 to ES07FF
U0000 to U7FFF
EB00000 to EB07FFF
EB08000 to EB0FFFF
EB10000 to EB17FFF
EB18000 to EB1FFFF
TCS0000 to TCS01FF
Setting range of each bit device
8.6 Device Range that Can Be Set
Device No.
representation
Hexadecimal
8
Hexadecimal
8 - 23