10.2.4 Conditions for Selecting Peripheral Equipment of Servo
Amplifier
To select peripheral equipment for a single servo amplifier
Obtain "1.5 times" the input current (Iin) obtained above.
To select peripheral equipment for two or more servo amplifiers
Multiply "1.5 times" the sum of the input currents (Iin) of all servo amplifiers.
[Example] In case of two 200 [W] units and three 400 [W] units (In case of 3-phase 200V)
I = {(1.4 × 2) + (2.7 × 3)} × 1.5 = 16.35 [A]
Select peripheral equipment having 16.35 [A] or a larger rated current.
CHAPTER 10 PERIPHERAL EQUIPMENT
10-7
Cable Size
10