Administration
System Software and Configuration Management
Cisco Small Business 200E Series Advanced Smart Switch Command Reference
set contact
Use this command to set a string that identifies a contact for switch. Use the no
form of the command to remove the contact information.
set contact contact
no set contact
Syntax Descriptions
Parameter
contact
Default
No contact string.
Command Modes
Global Config
Related Commands
Command
set hostname
set location
set hostname
Use this command to set the hostname for the switch. The hostname displays in
the CLI prompt. Use the no form of the command to set the hostname to the
default.
set hostname hostname
no set hostname
Description
A name or other entity that serves as the contact for switch
administration, from 1–160 characters.
Description
Sets the hostname for the switch.
Sets the switch location string.
2
122