Cdp Format Device-Id - Cisco Nexus 7000 Series Reference Manual

cdp format device-id

cdp format device-id
To configure a device ID format for Cisco Discovery Protocol (CDP), use the cdp format device-id
command. To remove the device ID format, use the no form of this command.
Syntax Description mac-address
serial-number
system-name
Defaults
None
Command Modes
Global configuration mode (config)
Supported User Roles network-admin
vdc-admin
Command History Release
4.0(1)
Usage Guidelines This command does not require a license.
Examples This example shows how to configure a device ID format for CDP:
switch(config)# cdp format device-id mac-address
switch(config)#
This example shows how to remove the device ID format:
switch(config)# no cdp format device-id mac-address
switch(config)#
Related Commands Command
cdp enable
Cisco Nexus 7000 Series NX-OS System Management Command Reference
38
cdp format device-id {mac-address | serial-number | system-name}
no cdp format device-id {mac-address | serial-number | system-name}
Specifies the MAC-address of the chassis.
Specifies the chassis serial number or Organizationally Unique Identifier (OUI).
Specifies the system name. The default is fully qualified domain name.
Modification
This command was introduced.
Description
Configures a device ID format for CDP.
C Commands
OL-25806-03