Clear Lldp Table - Cisco 300 Series Cli Manual

37
Link Layer Discovery Protocol (LLDP) Commands
to disable this mode. The network policy is attached automatically to the voice
VLAN.
Syntax
lldp med network-policy voice auto
no lldp med network-policy voice auto
Parameters
N/A
Default Configuration
N/A
Command Mode
Global Configuration mode
User Guidelines
In Auto mode, the Voice VLAN feature determines on which interfaces to advertise
the network policy TLV with application type voice, and controls the parameters of
that TLV.
To enable the auto generation of a network policy based on the auto voice VLAN,
there must be no manual pre-configured network policies for the voice application
In Auto mode, you cannot manually define a network policy for the voice
application using the lldp med network-policy (global) command.
Example
switchxxxxxx (config)# lldp med network-policy voice auto

37.20 clear lldp table

Use the clear lldp table command in Privileged EXEC mode to clear the neighbors
table for all ports or for a specific port.
Syntax
[interface-id]
clear lldp table
618 78-21075-01 Command Line Interface Reference Guide