Network-Policy Profile (Global Configuration) - Cisco Catalyst 3650 series Command Reference Manual

network-policy profile (global configuration)

network-policy profile (global configuration)
To create a network-policy profile and to enter network-policy configuration mode, use the network-policy
profile command in global configuration mode. To delete the policy and to return to global configuration
mode, use the no form of this command.
network-policy profile profile-number
no network-policy profile profile-number
Syntax Description
profile-number
Command Default
No network-policy profiles are defined.
Command Modes
Global configuration
Command History
Release
Cisco IOS XE 3.3SECisco IOS XE 3.3SE
Usage Guidelines
Use the network-policy profile global configuration command to create a profile and to enter network-policy
profile configuration mode.
To return to privileged EXEC mode from the network-policy profile configuration mode, enter the exit
command.
When you are in network-policy profile configuration mode, you can create the profile for voice and voice
signaling by specifying the values for VLAN, class of service (CoS), differentiated services code point (DSCP),
and tagging mode.
These profile attributes are contained in the Link Layer Discovery Protocol for Media Endpoint Devices
(LLDP-MED) network-policy time-length-value (TLV).
Examples This example shows how to create network-policy profile 60:
Device(config)# network-policy profile 60
Device(config-network-policy)#
Command Reference, Cisco IOS XE Everest 16.5.1a (Catalyst 3650 Switches)
56
Network-policy profile number. The range is 1 to 4294967295.
Modification
This command was introduced.