Ivr Copy Auto-Topology User-Configured-Topology - Cisco MDS 9000 series Command Reference Manual

Chapter 11 I Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

ivr copy auto-topology user-configured-topology

To copy the automatically discovered inter-VSAN routing (IVR) VSAN topology to the user configured
topology, use the ivr copy auto-topology user-configured-topology command in EXEC mode.
Syntax Description This command has no arguments or keywords.
Defaults None.
Command Modes
EXEC configuration mode.
Command History Release
2.1(1a)
Usage Guidelines After using the ivr copy auto-topology user-configured-topology command to copy the automatically
discovered VSAN topology into the user configured topology you must use the ivr commit command to
apply the pending configuration changes to the IVR topology using Cisco Fabric Services (CFS)
distribution.
Examples
The following example copies the automatically discovered VSAN topology into the user configured
topology.
switch# ivr copy auto-topology user-configured-topology
Related Commands Command
ivr commit
ivr copy active-topology
user-configured
topology
ivr copy active-zoneset
full-zoneset
show ivr vsan topology
OL-8413-07, Cisco MDS SAN-OS Release 3.x
ivr copy auto-topology user-configured-topology
Modification
This command was introduced.
Description
Applies the changes to the IVR topology.
Copies the active inter-VSAN routing (IVR) VSAN topology to the user
configured topology.
Copies the active zone set to the full zone set.
Displays the IVR VSAN topology configuration
ivr copy auto-topology user-configured-topology
Cisco MDS 9000 Family Command Reference
11-123