Voice Vlan Dscp - Cisco 300 Series Cli Manual

33
Voice VLAN Commands
33.5

voice vlan dscp

Use the voice vlan dscp Global Configuration mode command to specify a value
of DSCP that will be advertised by LLDP in the Network Policy TLV. The no format
of the command returns the value to the default.
Syntax
dscp-value
voice vlan dscp
no voice vlan dscp
Parameters
dscp-value
dscp —The DSCP value (range 0-63).
Default Configuration
46
Command Mode
Global Configuration mode
Example
The following example sets 63 as the voice VLAN DSCP.
switchxxxxxx(config)# 63
voice vlan dscp
For Auto Voice VLAN, changes in the voice VLAN ID, CoS/802.1p, and/or DSCPwill
cause the switch to advertise the administrative voice VLAN as static voice
VLANwhich has higher priority than voice VLAN learnt from external sources.
Are you sure you want to continue? (Y/N)[Y] Y
30-Apr-2011 00:31:07 %VLAN-W-BestLocal!=Oper: inconsistency detected, VSDP voice
VLAN configuration differs from best local. Best local is Voice VLAN-ID 104, VPT
7, DSCP 46
switchxxxxxx(config)#30-Apr-2011 00:31:22 %VLAN-I-ReceivedFromVSDP: Voice VLAN
updated by VSDP. Voice VLAN-ID 104, VPT 7, DSCP 63
532 78-21075-01 Command Line Interface Reference Guide