Show Arp Access-List - Cisco Catalyst 3560-X Command Reference Manual

Chapter 2 Catalyst 3750-X and 3560-X Cisco IOS Commands

show arp access-list

Syntax Description
Command Modes
Command History
Usage Guidelines
Examples
Related Commands
OL-21522-02
Downloaded from www.Manualslib.com
Use the show arp access-list user EXEC command to display detailed information about Address
Resolution Protocol (ARP) access control (lists).
show arp access-list [acl-name] [ | {begin | exclude | include} expression]
acl-name (Optional) Name of the ACL.
| begin (Optional) Display begins with the line that matches the expression.
| exclude (Optional) Display excludes lines that match the expression.
| include (Optional) Display includes lines that match the specified expression.
expression Expression in the output to use as a reference point.
User EXEC
Release
12.2(53)SE2
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
are not displayed, but the lines that contain Output are displayed.
This is an example of output from the show arp access-list command:
Switch> show arp access-list
ARP access list rose
permit ip 10.101.1.1 0.0.0.255 mac any
permit ip 20.3.1.0 0.0.0.255 mac any
Command
arp access-list
deny (ARP access-list
configuration)
ip arp inspection filter vlan
permit (ARP access-list
configuration)
manuals search engine
Modification
This command was introduced.
Description
Defines an ARP ACL.
Denies an ARP packet based on matches against the Dynamic Host
Configuration Protocol (DHCP) bindings.
Permits ARP requests and responses from a host configured with a
static IP address.
Permits an ARP packet based on matches against the DHCP bindings.
Catalyst 3750-X and 3560-X Switch Command Reference
show arp access-list
2-511