Ip Igmp Last-Member-Query-Count; Ip Igmp Last-Member-Query-Interval - Cisco 300 Series Cli Manual

IGMP Snooping Commands
78-21075-01 Command Line Interface Reference Guide

38.15 ip igmp last-member-query-count

Use the ip igmp last-member-query-count Interface Configuration (VLAN) mode
command to configure the Last Member Query Counter on a VLAN. Use the no
format of the command to return to default.
Syntax
ip igmp last-member-query-count
no ip igmp last-member-query-count
Parameter
count—The number of times that group- or group-source-specific queries are sent
upon receipt of a message indicating a leave. (Range: 1–7)
Default Configuration
A value of Robustness variable
Command Mode
Interface Configuration (VLAN) mode
User Guidelines
You can execute the command before the VLAN is created.
Example
switchxxxxxx(config)# interface vlan 1
switchxxxxxx(config-if)# ip igmp last-member-query-count 7

38.16 ip igmp last-member-query-interval

Use the ip igmp last-member-query-interval Interface Configuration (VLAN) mode
command to configure the Last Member Query interval on a VLAN. Use the no
format of the command to return to default.
Syntax
ip igmp last-member-query-interval
no ip igmp last-member-query-interval
count
milliseconds
38
647