Interface Range Vlan - Cisco 300 Series Cli Manual
Small business 300 series managed switches
command line interface guide release 1.3
Hide thumbs
Also See for 300 Series:
- Cli manual (1117 pages) ,
- Administration manual (586 pages) ,
- Quick start manual (72 pages)
Table of Contents
Advertisement
Virtual Local Area Network (VLAN) Commands
78-21075-01 Command Line Interface Reference Guide
Syntax
vlan-id
interface vlan
Parameters
vlan-id
vlan
—Specifies the VLAN to be configured.
Default Configuration
N/A
Command Mode
Global Configuration mode
Example
The following example configures VLAN 1 with IP address 131.108.1.27 and
subnet mask 255.255.255.0.
switchxxxxxx (config)#
switchxxxxxx (config-if)#
32.7
interface range vlan
Use the interface range vlan Global Configuration mode command to configure
multiple VLANs simultaneously.
Syntax
vlan-range
interface range vlan
Parameters
vlan-range
vlan
—Specifies a list of VLANs. Separate nonconsecutive VLANs with
a comma and no spaces. Use a hyphen to designate a range of VLANs.
Default Configuration
N/A
Command Mode
Global Configuration mode
1
interface vlan
ip address
131.108.1.27 255.255.255.0
32
493
Advertisement
Table of Contents
