Configuring Vlan Interface Settings - Cisco 200 Series Administration Manual

VLAN Management

Configuring VLAN Interface Settings

STEP 1
STEP 2
STEP 3
STEP 4
Configuring VLAN Interface Settings
STEP 1
STEP 2
STEP 3
Cisco Small Business 200 Series Smart Switch Administration Guide
To create a VLAN:
Click VLAN Management > Create VLAN. The Create VLAN Page opens.
The Create VLAN page displays the following fields for all VLANs:
• VLAN ID—User-defined VLAN ID.
• VLAN Name—User-defined VLAN name.
• Type—VLAN type. The possible options are:
- Static—VLAN is user-defined.
- Default—VLAN is the default VLAN.
Click Add to add a new VLAN or select an existing VLAN and click Edit to modify
the VLAN parameters. The Add/Edit VLAN Page opens.
The page enables the creation of either a single VLAN or a range of VLANs.
To create a single VLAN, select the VLAN radio button, enter the VLAN ID (VID),
and optionally the VLAN Name.
To create a range of VLANs, select the Range radio button, and specify the range
of VLANs to be created by entering the Starting VID and Ending VID, inclusive.
Click Apply to create the VLAN(s).
The Interface Settings Page
parameters for all interfaces. The Cisco Sx200 Series switch supports 128
VLANs, including the default VLAN.
To configure the VLAN settings:
Click VLAN Management > Interface Settings. The
opens.
The Interface Settings page lists all ports or LAGs and their VLAN parameters.
Select an interface type (Port or LAG), and click Go.
Select a port or LAG, and click Edit. The Edit Interface Setting Page opens.
displays and enables configuration of VLAN-related
11
Interface Settings Page
109