Show Spanning-Tree Mst Port Detailed - Cisco Small Business 200 Series User Manual

Spanning Tree Protocol
Cisco Small Business 200E Series Advanced Smart Switch Command Reference
Hello Time..................................... Not Configured
Port Mode...................................... Enabled
BPDU Filter Mode............................... Disabled
BPDU Flood Mode................................ Enabled
Auto Edge...................................... TRUE
Port Up Time Since Counters Last Cleared....... 0 day 0 hr 5 min 24 sec
STP BPDUs Transmitted.......................... 0
STP BPDUs Received............................. 0
RSTP BPDUs Transmitted......................... 0
RSTP BPDUs Received............................ 0
MSTP BPDUs Transmitted......................... 0
MSTP BPDUs Received............................ 0
Related Commands
Command
spanning-tree
port mode
spanning-tree
bpdufilter
spanning-tree
bpdufilter
default
spanning-tree
edgeport
show spanning-
tree
show spanning-
tree brief

show spanning-tree mst port detailed

Use this command to display the detailed settings and parameters for a specific
switch port within a particular multiple spanning tree instance.
show spanning-tree mst port detailed mstid interface
Description
Enables the spanning tree administrative mode on a port.
Discards BPDUs received on the specified interface.
Discards BPDUs received on all ports.
Specifies that the port is an Edge Port.
Displays spanning tree settings for the common and internal
spanning tree.
Displays spanning tree settings for the bridge.
5
278