Clear Spanning-Tree Detected-Protocols - Cisco Sx350 Cli Manual

58
1115
Parameters
enable
bpduguard —Enables BPDU Guard.
disable
bpduguard —Disables BPDU Guard.
Default Configuration
BPDU Guard is disabled.
Command Mode
Interface (Ethernet, Port Channel) Configuration mode
User Guidelines
The command can be enabled when the spanning tree is enabled (useful when the
port is in the PortFast mode) or disabled.
Example
The following example shuts down
switchxxxxxx(config)#
switchxxxxxx(config-if)#

58.17 clear spanning-tree detected-protocols

Use the clear spanning-tree detected-protocols Privileged EXEC mode command
to restart the STP migration process (force renegotiation with neighboring
switches) on all interfaces or on the specified interface
Syntax
clear spanning-tree detected-protocols
Parameters
interface-id—Specifies an interface ID. The interface ID can be one of the
following types: Ethernet port or Port-channel.
Default Configuration
All interfaces.
5 when it receives a BPDU.
gi1
gi1
interface 5
spanning-tree bpduguard enable
[interface interface-id]
Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide
Spanning-Tree Commands