Show Port-Security - Cisco Nexus 7000 Series Command Reference Manual

Show Commands

show port-security

To show the state of port security on the device, use the show port-security command.
show port-security [state]
Syntax Description
state
Command Default
None
Command Modes
Any command mode
Command History
Release
4.2(1)
4.0(1)
Usage Guidelines
This command does not require a license.
Examples This example shows how to use the show port-security command to view the status of the port security
feature on a device:
switch# show port-security
Total Secured Mac Addresses in System (excluding one mac per port)
Max Addresses limit in System (excluding one mac per port) : 8192
----------------------------------------------------------------------------
Secure Port
----------------------------------------------------------------------------
Ethernet1/4
============================================================================
switch#
Related Commands
Command
feature port-security
show port-security address
show port-security interface
Modification
Support for Layer 2 port-channel interfaces was added.
This command was introduced.
MaxSecureAddr CurrentAddr
(Count) (Count)
5
(Optional) Shows that port security is enabled.
SecurityViolation Security Action
(Count)
1 0
Description
Enables the port security feature.
Shows MAC addresses secured by the port security
feature.
Shows the port security status for a specific interface.
Cisco Nexus 7000 Series Security Command Reference
show port-security
: 0
Shutdown
851