Monitoring Flex Links, Multicast Fast Convergence, And Mac Address-Table Move Update - Cisco Catalyst 2960 series Configuration Manual

Monitoring Flex Links, Multicast Fast Convergence, and MAC Address-Table Move Update

Command or Action
Example:
Switch# configure terminal
Step 2
mac address-table move update receive
Example:
Switch (config)# mac address-table move update
receive
Step 3
end
Example:
Switch (config)# end
Related Topics
Monitoring Flex Links, Multicast Fast Convergence, and MAC Address-Table Move Update, on page
386
Configuring the MAC Address-Table Move Update: Examples, on page 389
MAC Address-Table Move Update, on page 377
Restrictions for Configuring Flex Links and MAC Address-Table Move Update, on page 373
Configuring the MAC Address-Table Move Update: Examples, on page 389
Monitoring Flex Links, Multicast Fast Convergence, and MAC Address-Table
Move Update
Command
show interface [interface-id]
switchport backup
show ip igmp profile address-table
move update profile-id
show mac address-table move update
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
386
Purpose
Enables the switch to obtain and processes the MAC
address-table move updates.
Returns to privileged EXEC mode.
Purpose
Displays the Flex Links backup interface configured for an interface
or all the configured Flex Links and the state of each active and
backup interface (up or standby mode).
Displays the specified IGMP profile or all the IGMP profiles
defined on the switch.
Displays the MAC address-table move update information on the
switch.