Line Commands; Table 19-3 Line Commands; Figure 19-3 Setting Up Frame Relay Lines; Figure 19-4 Setting Up Atm Lines - Cisco BPX-BXM-155-8DX Installation And Configuration Manual

Setting Up a Circuit Line

Figure 19-3 Setting Up Frame Relay Lines

SETUP FRAME
RELAY LINES
AND PORTS?

Figure 19-4 Setting Up ATM Lines

SETUP ATM LINES
AND PORTS?

Line Commands

Table 19-3 Here are the names and descriptions for each line command:

Table 19-3 Line Commands

Name
cnfcassw
cnfln
cnfrsrc
dnln
dsplncnf
dsplns
dsptsmap
prtlns
upln
Cisco BPX 8600 Series Installation and Configuration
19-4
UPCLN CNFCLN ADDFRPORT
Yes
Multiplex?
No
UPLN CNFLN ADDPORT
Description
Configure CAS switching
Configure line (same as cnfcln)
Configure resources
Down line (same as dncln). A downed line is inactive, so no signals or
statistics are generated. You must remove all connections on a line (delcon
or delcongrp) before you down the line by uising dnln.
Display line configuration (same as dspclncnf). Displays the configuration
of a specified circuit line.
Displays the circuit line configuration and alarm status for the node (same
as dspclns)
Display time slot map
Prints the circuit line configuration and circuit line alarm status for the
node (same as prtclns)
Up line (same as upcln)
UPFRPORT CNFFRPORT
VT
UPPORT CNFPORT
VT
Release 9.3.0, Part Number 78-10674-01 Rev. D0, July 2001
Chapter 19 Configuring Circuit Lines
No
Configure
Other?
connections
Yes
No
Configure
Other
connections
side?
Yes