Chapter 7 Option And Communication Cable For Handy Got; Connector Conversion Box; Applicable Connector Conversion Box; Connector Conversion Box (Gt16H-Cnb-42S) - Mitsubishi Electric GOT2000 Series Hardware User Manual

7
OPTION AND COMMUNICATION CABLE FOR
HANDY GOT
• Page 267 Connector Conversion Box
• Page 300 Emergency Stop Switch Guard Cover
• Page 301 Wall-mounting attachment
• Page 304 Overview of Communication Cable
• Page 308 External Cable, Relay Cable
7.1

Connector Conversion Box

The Handy GOT can monitor a PLC CPU or other controllers through the connector conversion box.
For the PLC CPU that can be monitored, refer to the following.
GOT2000 Series Handy GOT Connection Manual For GT Works3 Version1
The connector conversion box supplies power to the power supply input terminal of the Handy GOT, and relays signals from
the emergency stop switch of the GOT.
The connector conversion box has a mechanism to mount or demount the Handy GOT in operation.

Applicable connector conversion box

The following connector conversion box is applicable to the Handy GOT.
○: Usable, -: Not usable
Product name Model
Connector conversion GT16H-CNB-42S
box
GT16H-CNB-37S
GT11H-CNB-37S

Connector conversion box (GT16H-CNB-42S)

Specifications
■General specifications
Other specifications are the same as Handy GOT.
Item
Operating ambient temperature
Storage ambient temperature
Vibration resistance
■Power supply specifications
Other specifications are the same as Handy GOT.
Item
Input power supply voltage
Power consumption
Connector
conversion box
only
Inrush current
Permissible instantaneous power
failure time
Content
Packing for panel installation × 1 (accessory), Flange for
GT10-9PT5S × 1 (accessory)
Screws for flange installation (M3 × 8) × 2 (accessory)
Bracket for installing a connector conversion box on the
panel × 1 (accessory)
Screws for installing the bracket (M3 × 8) × 3 (accessory)
Specifications
0 °C to 55 °C
-20°C to 70°C
When installing DIN rail Frequency
5 Hz to 8.4 Hz
8.4 Hz to 150 Hz
Specifications
24 V DC (+10% -15%)
13.7 W or less (570 mA/24 V DC) (When including the consumption current of Handy GOT)
2.2 W (90 mA/24 V DC) (When excluding the consumption current of Handy GOT)
25 A or less (at max. load) 2 ms
Within 5 ms
Acceleration
—
2
4.9 m/s
7 OPTION AND COMMUNICATION CABLE FOR HANDY GOT
GT2506HS-V GT2505HS-V
○ ○
○ ○
— ○
Half-amplitude Sweep Count
1.75 mm 10 times each in X,
Y and Z directions
—
7.1 Connector Conversion Box
7
267