Error Messages And System Alarms; Displayed Contents - Mitsubishi Electric GOT2000 Series User Manual

Graphic operation terminal
Hide thumbs Also See for GOT2000 Series:
Table of Contents

Advertisement

10.3 Error Messages and System Alarms

This section explains the error messages and system alarms displayed on the GOT.
The system alarm function displays the error code and error message when an error occurs in the GOT, controller, or
network.
For the details of the system alarm, refer to the following.
GT Designer3 (GOT2000) Screen Design Manual
10.3.1

Displayed contents

The section explains an example of displaying an error code and error message on the GOT.
■1. Displaying the error codes and error messages with the popup display (Alarm popup
display)
When an error occurs, the GOT can display the error code and error message with the popup display at the front of the
monitor screen.
Since an alarm pops up regardless of the screen, you cannot miss the error.
■2. Displaying the error codes and error messages in a list (System alarm display)
When an error occurs, the GOT can display the error codes and error messages in the list set on the screen.
Displaying multiple errors and recording the events as history are available.
POINT
POINT
POINT
Error code and channel No.
You can check error codes in the error code storage area of the system information function.
You can check the channel No. where an error occurs with the GOT special register (GS262 to
264).
For the details of the system information and GOT special register, refer to the following.
GT Designer3 (GOT2000) Screen Design Manual
Create a screen to display alarms,
and confirm the details of the alarms
and take measures for the errors.
A 1254
A 1254
B
348
B
348
04/6/1 13:20 Power module
Generated alarms are popped up
regardless of the screen.
Date
Time
Message
Recovered
Checked
04/6/1
10:25
Temp.error
04/6/1
8:05
Fuse error
11:25
10:45
10.3 Error Messages and System Alarms
10
10 - 17

Advertisement

Table of Contents
loading

Table of Contents