Download  Print this page

Change Of Displayed Data; Common Contents In Data Change - Mitsubishi Electric F930GOT-BWD Operation Manual

Got-f900 series graphic operation terminals melsec-got.
Hide thumbs

Advertisement

Graphic Operation Terminal GOT-F900
9.5

Change of displayed data

Among the data displayed on the user screen, numeric data indicating set values and current
values of word devices in the PLC can be changed by key operation.
In FX-PCS-DU/WIN-E, "Number" and "Ascii" can be changed. In GT Designer, "Numerical
Input" and "Ascii input" can be changed.
9.5.1

Common contents in data change

This paragraph describes the common contents when changing numeric data and ASCII code
data.
• By touching a numeric or ASCII code on the display screen, it can be changed.
*1 In FX-PCS-DU/WIN-E, "Number" and "Ascii" should have been set to "PERMIT".
In GT Designer, "Numerical input" and "Ascii Input" can be changed.
• A numeral can be entered using two methods. In the first method, the keyboard for numeric
input is always displayed. In the second method, the keyboard can be called when an input
is required.
[ When the keyboard is always displayed ]
OPERATION STATE MONITOR
CURRENT
VALUE
5
6
7
0
1
2
[ When the keyboard is called ]
OPERATION STATE MONITOR
CURRENT
VALUE
• When text is to be entered using ASCII codes, make sure that the keyboard to input
text is always displayed on the screen. When the keyboard is used in GT Designer,
the keyboard should be created using key codes for touch switches.
When the keyboard is called, only 0 to 9 can be entered.
1 2 3
4
Cursor
display
5
6 7 8
8
9
-
CLR
3
4
ENT
1 2 3
4
Cursor
displa
y
7
8
9
CLR
4
5
6
1
2
3
0
- ENT
• When a numeric or ASCII code displayed on the
screen is touched, a cursor is displayed and the
numeric or ASCII code can be changed using the
on screen keyboard.
When GT Designer is used, "Project Unit" in
"Auxiliary Setting" in "Common Setting" should
have been set so that the key window is open.
• Press the CLR key to cancel the input.
Press the ENT key to execute the input.
• When selecting another numeric or ASCII code,
touch it on the screen or select it using the
keys.
• If the keyboard is not displayed on screen, when a
numeric or ASCII code touched, the ten-key pad is
displayed as shown on the left so that numerics
can be entered.
• To enter a numeric in hexadecimal or change the
keyboard design, select an appropriate keyboard
using the "Keyboard" object.
Screen mode 9
and
9-8

Advertisement

Table of Contents

   Related Manuals for Mitsubishi Electric F930GOT-BWD

Comments to this Manuals

Symbols: 0
Latest comments: