Error Codes And Error Messages; Definition Of The Error Codes And Messages Displayed - Mitsubishi Electric A960GOT User Manual

8 ERROR CODES AND ERROR MESSAGES

8 ERROR CODES AND ERROR MESSAGES
This chapter explains the error codes and error messages displayed by the alarm list
(system alarm) display function of the monitoring functions.
The error codes may also be confirmed in the error code storage area of the system
information function.
For more information on the alarm list (system alarm) display function and system
information function, refer to [GT Designer Help Function].

8.1 Definition of the Error Codes and Messages Displayed

This section describes the definition of the error codes and error messages displayed
on the monitor screen by the alarm list (system alarm) display function and the
manuals to refer to.
(1) Display format on the monitor screen • • • Displayed in the user-set position
(2) Error codes and manuals to refer to
Source of Error
Error Code
Occurrence
ACPU
(Value of D9008)
MNET/B, MNET(II) 200 to 299
GOT 300 to 499
MNET/10 500 to 799
CC-Link 800 to 999
1000 to 9999
QnACPU
(Value of SD0)
1 Take action with reference to the section explaining the link special relay of the (error code)+9000.
For example, when the error of error code (210) has occurred, 210 + 9000 = 9210 and refer to the
explanation of M9210 and take the corrective action.
2 Take action with reference to the section explaining the link special relay of the (error code) -500.
For example, when the error of error code (510) has occurred, 510 - 500 = 10 and refer to the explanation
of SB000A and take the corrective action.
(Since the link special relay is in hexadecimal, replace a decimal by a hexadecimal.)
3 Take action with reference to the section explaining the link special relay of the (error code)-800.
For example, when the error of error code (910) has occurred, 910-800=110 and refer to the explanation
of SB006E and take the corrective action.
(Since the link special relay is in hexadecimal, replace a decimal by a hexadecimal.)
4 The FXCPU has error codes 100 to 109 and displays the states of M8060 to M8069 with the error codes.
For example, when the error of error code (100) has occurred, refer to the explanation of M8060 and take
the corrective action.
8 - 1
Alarm No. Alarm message
Error code
0 to 199
[User's Manual of ACPU where GOT is connected]
[Data Link System Reference Manual of MNET(II), MNET/B]
[Section 8.2]
[Network System Reference Manual of MNET/10]
[CC-Link System Master · Local Module User's Manual]
[User's Manual of QnACPU where GOT is connected]
Time of occurrence
Error message
Where to Refer To
2
MELSEC-GOT
Time when error occurred
(most recent)
1
3
8 - 1
8