5.13.1.2 Saving Protection Sets - Studer D950 Operating Instructions Manual

5.13.1.2 Saving Protection Sets

Date printed: 27.08.03
4. Check "Protect From Automation Enable" for the selected set of con-
trols and/or the General Patch. Click the USE button to enable Protec-
tion for the selected Protection Set.
Note: Either the "Current" or "Both" radio button in the "Use" section of the
Automation Protection window must be selected to enable the Edit button.
Any number of Protection Sets may be created and saved. A temporary
Protection Set will persist in the system unless it is overwritten, even if the
Mix Tree and Title are closed. Temporary and modified sets may be saved
at anytime.
Using the following procedure, Protection Sets may be saved:
1. Once a Protection Set has been created or modified, click the "Save
As..." button. The Protection Set save box will open.
SW V3.3
D950/Vista7 Digital Mixing System
AutoTouch+ 5-107